ZyXEL Communications NXC2500 User Manual page 61

Table 26 Monitor > System Status > Interface Status (continued)
LABEL DESCRIPTION
Status This field displays the current status of each interface. The possible values depend on what
type of interface it is.
For Ethernet interfaces:
Inactive - The Ethernet interface is disabled.
Down - The Ethernet interface is enabled but not connected.
Speed / Duplex - The Ethernet interface is enabled and connected. This field displays the
port speed and duplex setting (Full or Half).
For VLAN interfaces:
Up - The VLAN interface is enabled and one of its member Ethernet interfaces is
connected.
Down - The VLAN interface is enabled but none of its member Ethernet interfaces is
connected.
Inactive - The VLAN interface is disabled.
Zone This field displays the zone to which the interface is assigned.
IP Addr/Netmask This field displays the current IP address (and subnet mask) of the interface. If the IP
address and subnet mask are 0.0.0.0 (in the IPv4 network) or the IP address is :: (in the
IP Address
IPv6 network), the interface is disabled or does not have an IP address yet.
In the IPv6 network, this screen also shows whether the IP address is a static IP address
(STATIC), link-local IP address (LINK LOCAL), dynamically assigned (DHCP), or an IPv6
StateLess Address AutoConfiguration IP address (SLAAC). See
more information about IPv6.
IP Assignment This field displays how the interface gets its IP address.
Static - This interface has a static IP address.
DHCP Client - This interface gets its IP address from a DHCP server.
Services This field lists which services the interface provides to the network. Examples include
DHCP relay and DHCP server. This field displays n/a if the interface does not provide
any services to the network.
Action Use this field to get or to update the IP address for the interface. Click Renew to send a
new DHCP request to a DHCP server. Click Connect to try to connect the interface. If the
interface cannot use one of these ways to get or to update its IP address, this field displays
n/a.
Interface This table provides packet statistics for each interface.
Statistics
Refresh Click this button to update the information in the screen.
Name This field displays the name of each interface.
Chapter 5 Monitor
NXC Series User's Guide
61
Appendix E on page 440 for