Adding Or Editing An Snmpv3 User Profile; Authentication Server - ZyXEL Communications NXC2500 User Manual

28.11.4 Adding or Editing an SNMPv3 User Profile

This screen allows you to add or edit an SNMPv3 user profile. To access this screen, click the
Configuration > System > SNMP screen's Add button or select a SNMPv3 user profile from the
list and click the Edit button.
Figure 192 Configuration > System > SNMP > Add
The following table describes the labels in this screen.
Table 167 Configuration > System > SNMP
LABEL
User Name
Authentication
Privacy
Privilege
OK
Cancel

28.12 Authentication Server

You can set the NXC to work as a RADIUS server to exchange messages with a RADIUS client, such
as an AP for user authentication and authorization. Click Configuration > System > Auth.
Server tab. The screen appears as shown. Use this screen to enable the authentication server
feature of the NXC and specify the RADIUS client's IP address.
Chapter 28 System
DESCRIPTION
Select the user name of the user account for which this SNMPv3 user profile is configured.
Select the type of authentication the SNMPv3 user must use to connect to the NXC using
this SNMPv3 user profile.
Select MD5 to require the SNMPv3 user's password be encrypted by MD5 for
authentication.
Select SHA to require the SNMPv3 user's password be encrypted by SHA for
authentication.
Select the type of encryption the SNMPv3 user must use to connect to the NXC using this
SNMPv3 user profile.
Select NONE to not encrypt the SNMPv3 communications.
Select DES to use DES to encrypt the SNMPv3 communications.
Select AES to use AES to encrypt the SNMPv3 communications.
Select whether the SNMPv3 user can have read-only or read and write access to the NXC
using this SNMPv3 user profile.
Click OK to save your changes back to the NXC.
Click Cancel to exit this screen without saving your changes.
NXC Series User's Guide
324