Field Service Ver. 2.0 Dec. 2008
C. Vendor (+ Key Counter)
Functions
• To set whether or not the vendor is installed.
Use
• Set when the vendor is mounted.
NOTE
• When using the vendor along with the key counter, inserting the key counter
will set it to the "Key Counter Mode" and removing it will set it to the "Vendor
Mode".
Setting/
• When using the vendor together with the key counter, select the same color mode
Procedure
and message as the key counter.
(Only for key counter, the type of the color mode and message are same after mount-
ing.)
• When setting the mounting of vendor, touch [(vendor) Message] to set message.
✽ Message
Type 1: Message for key counter
Type 2: Message for card scanning
Type 3: Message for ID management
12.3.3
Coverage Rate Clear
Functions
• To clear the coverage rate.
Use
• Use to clear the coverage rate.
Setting/
• The default setting is Unset.
Procedure
• Touching [OK] key will clear the coverage rate.
Set
12. Billing Setting
"Unset"
323