Fusing Drive Unit - Konica Minolta bizhub C200 Service Manual

Field Service Ver. 2.0 Dec. 2008
6.3.27

Fusing drive unit

1. Remove the transfer belt unit.
See P.24
2. Remove the fusing unit.
See P.56
3. Remove the fusing motor.
See P.94
[2] [1]
[4]
[3]
[1]
[3]
[1]
A02FF2C056DA
[3]
[1] [2] [4]
A02FF2C057DB
[2]
A02FF2C058DA
4. Disconnect three connectors [1].
5. Remove the harness from three wire
saddles [1] and two harness guides
[2].
6. Remove four screws [3], and remove
two harness guides [4].
7. Disconnect two connectors [1], and
remove the harness from the wire
saddle [2].
8. Remove the harness from the edge
cover [3].
6. Other
69