Exposure Unit - Konica Minolta bizhub C200 Service Manual

6. Other
NOTE
• When reinstalling the scanner chassis on the engine frame, tighten screws in the
order shown below.
1. Right side (4 screws)
2. Rear side (2 screws)
3. Left side (2 screws)
6.3.31

Exposure unit

1. Remove the original glass assy.
See P.53.
2. Remove the ADF glass assy.
See P.54
[2]
[1]
76
[1]
A02FF2C101DA
Field Service Ver. 2.0 Dec. 2008
3. Remove eight screws [1], and
remove the BCRU shield cover [2].
A02FF2C515DA