Feed Roller - Konica Minolta bizhub C200 Service Manual

Field Service Ver. 1.0 Jun. 2008
[1]
[2]
[3]
[2]
2.3.5

Feed roller

1. Remove the separation roller installation plate assy.
See the procedures 1 to 6 in P.6 "Separation roller."
[1]
7. Remove two C-rings [1] and the
shaft [2], and remove the separation
[3]
roller fixing plate assy [3].
NOTE
• Use care not to miss the Spring [4].
[4]
[1]
4067F2C520DA
8. Remove the C-ring [1] and guide [2],
and remove the separation roller
assy [3].
[1]
4067F2C521DA
2. Disconnect the connector [1].
4067F2C007DA
2. Other
7