Konica Minolta bizhub C200 Service Manual page 390

Field Service Ver. 2.0 Dec. 2008
Code
C6704 Image input time out
C6751 CCD clamp/gain adjustment
failure
C8001 • Not used.
CC151 ROM contents error upon
start-up
CC155 Finisher ROM error
Item
• The scan motion is not completed even after the
lapse of a predetermined period of time because of
a hardware failure or other reason.
• The automatic gain control fails to converge when
the main unit is started or a scan motion is started
(the exposure unit does not move to the white refer-
ence position, or the automatic gain control is not
properly completed as a result of a hardware failure).
• A fault detected in a sequence of ROM contents
check of the printer control board during starting.
See P.23 of the JS-505 service manual.
17. Malfunction code
Detection timing
Rank
C
B
C
C
349