Konica Minolta bizhub C200 Service Manual page 286

Field Service Ver. 2.0 Dec. 2008
Bit
1 Acquire job properties
0 Acquire printer properties
Mode
379
State
Bit
3-2 Specify position for cutting off data when for-
warding received documents
Specify position for cutting off data for the
main scan size from the original size to send-
ing size when forwarding received docu-
ments.
1-0 Specify image editing when forwarding
Specify whether to set the main scan width of
received data to regular width or leave the
stored data width as is when forwarding
received documents.
Setting item
Default value
Bit 7654 3210
0000 0000
Setting item
Setting value
0 1
Sets the response content
as to whether the acquire
job properties function is
supported for IPP commu-
OFF ON
nication.
When OFF, responds as
not supported. When ON,
does not respond.
Sets the response content
as to whether the acquire
job properties function is
supported for IPP commu-
OFF ON nication.
When OFF, responds as
not supported. When ON,
responds to communica-
tion.
HEX: 00
Setting value
0 1
00 Center
01 Left side
10 Not available
11 Right side
Edit to regular size and
00
forward
01 Forward stored data as is
others Not available
10. Service Mode
Description
Description
245