Konica Minolta bizhub C200 Service Manual page 240

Field Service Ver. 2.0 Dec. 2008
Error code
3008 POP3_DELETE_FAIL_ERR
3009 POP3_MAILBOX_FULL
Not ready
• Tried to transmit or receive an e-mail when the
4103
machine was not yet in the e-mail receiving
status after power was turned ON.
4104 SMTP channel not ready
4105 POP3 channel not ready
4106 Not Ready other than the ones listed above.
NOTE
• When a code other than the ones listed above is displayed, contact KMBT and
inform the error code.
C. When connecting by Fax modem
Error code
T50 Host terminal ID not correct
R80 Serial number received from the host not correct. • Check the status of the
R81 Disconnection of writing instruction from host
during machine is running.
R82 Disconnection of FAX-CSRC instruction when
FAX-CSRC is not allowed.
R83 Host command error.
R84 NVRAM writing error.
NOTE
• When a code other than the ones listed above is displayed, see the FK-502 Service
Manual.
Error
Error
10. Service Mode
Solution
• Check the POP3 server
environment on user's side.
• Check the POP3 server envi-
ronment on user's side.
• Wait for a while and try trans-
mitting again.
• Wait for a while and try trans-
mitting again.
• Wait for a while and try trans-
mitting again.
• Wait for a while and try trans-
mitting again.
Solution
• Check the telephone number
set for host.
Machine registration on host
side.
• Wait for a while and try trans-
mitting again.
• Check the status of the
Machine registration on host
side.
• Contact KMBT and inform the
error code.
• Contact KMBT and inform the
error code.
199
1