Konica Minolta bizhub C200 Service Manual page 273

10. Service Mode
Bit
2 Disable SMTP reception
1 TSI information for SMTP reception
Specify whether to describe the machine
name (or IP address if none) of the TSI in
subject or to prioritize the IP address when
forwarding documents received by Internet
FAX (IP-TX).
This setting is applied also for the priority
order of display of destination name informa-
tion of the RX activity report for Internet FAX
(IP-TX) reception and IP relay reception.
NOTE
• For actually calling ports G3-1 and G3-2, see "Select PSTN port automatically
(MODE 043 Bit 1)".
Mode
352
State
Bit
7 Notification of result (Network function)
6 Position for adding Gateway TSI
5 Specify whether to add TSI when forwarding
4 Position for adding TSI when forwarding
232
Setting item
Default value
Bit 7654 3210
1101 0000
Setting item
Field Service Ver. 2.0 Dec. 2008
Setting value
0 1
Specify allowed or not
allowed for SMTP recep-
tion.
Enable Disable
(for Internet fax(IP-TX),
Internet fax (IP relay)
reception)
Machine IIP
name pri- address
ority priority
HEX: D0
Setting value
0 1
Specify whether a com-
munication error message
is returned to the sender
No Yes when a communication
error occurs with code
E6xxxx when e-mail is
received.
Specify where to add the
Outside
Inside of TSI when forwarding
of docu-
document through gateway trans
ment
mission (IP relay).
Specify whether to add
Not add Add TSI when forwarding
received documents.
Outside Select where to add the
Inside of
of docu- TSI when forwarding
document
ment received documents.
Description
Description