Konica Minolta bizhub C200 Service Manual page 76

Field Service Ver. 2.0 Dec. 2008
14. Reinstall the cover of the slot.
15. Turn ON the main power switch.
16. Select [Admin.] → [Firmware Version].
17. Check that the firmware version has been updated.
A02FF2E530DA
A02FF2E531DA
[1]
A02FF2C526DA
5. Firmware upgrade
9. The screen on the left will appear as
soon as downloading starts.
NOTE
• While this screen is being dis-
played, which indicates that the
firmware is being rewritten, never
turn OFF the main power switch or
sub power switch, unplug the
power cord, open the cover, or oth-
erwise perform action to hamper
the rewriting procedure.
10. The screen on the left appears when
the rewriting sequence is completed.
11. Check the checksum value recorded
against that shown on the screen
and make sure that there is a match
between the two values.
12. Turn OFF the main power switch.
13. Remove the compact flash card [1]
from the slot.
35