List Of Soft Switches - Konica Minolta bizhub C200 Service Manual

7. Soft Switch
7.3

List of Soft Switches

NOTE
• If no bit settings are given in the soft switch list that follows, the factory settings
for those particular bits are fixed and should never be changed.
: Default settings of U.S.
: Default settings of Europe
: Default settings are common
MODE
Bit:
000
Bit Feature
5 Specifies whether print-
ing TSI on transmitted
document is returned to
ON or OFF after complet-
ing operations. <*>
4 Select position of TSI. <*>
3 Specifies whether con-
firming communication
password at TX is
returned to ON or OFF
after completing opera-
tions. <*>
2 Confirm communication
password at RX. <*>
1 Specifies which TX
method is returned to ON,
memory-stored TX or
quick scan TX, after com-
pleting operations. *
NOTE
• The features with (*) are settable by users. *: Screen setting <*>: Soft switch set-
ting
MODE
Bit:
001
Bit Feature
0 Specify whether to insert
a destination name on
document to send.
42
Factory setting bit
7 6 5 4 3 2 1 0
0 0 1 1 0 0 0 0
Logic
0
OFF ON
Out of On the
Doc. Doc.
OFF ON
No Yes
Memory- Quick
stored scan
Factory setting bit
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0
Logic
0
No Yes
Field Service Ver. 2.0 Dec. 2008
HEX: 30 (For U.S.)
HEX: 20 (For Europe)
Description
1
Memory-stored TX includes quick mem-
ory TX.
HEX: 00
Description
1