Konica Minolta bizhub C200 Service Manual page 175

8. Utility Mode
(2) Density Adjustment
<Thick Paper Image Density-Yellow, Magenta, Cyan, Black>
Functions • To fine-adjust density of printed images of each color for thick paper and OHP film.
(Only black color adjustable for OHP film)
Use • To change the density of the printed image for each color with thick paper and OHP
transparencies
Adjustment
Range
Adjustment Light color: Increase the setting value
Instructions Dark color: Decrease the setting value
Adjustment 1. Call the Admin. to the screen.
2. Touch [System Settings] → [Expert Adjustment] → [Density Adjustment].
Procedure
3. Select a color that need to be adjusted.
4. Touch the
<Black Image Density>
Functions • To fine-adjust the density of the printed image for a black copy
Use • To vary the density of the printed image of a black copy
Adjustment
Range
Adjustment The black is light : Increase the setting value
Instructions The black is dark : Decrease the setting value
Setting/ 1. Call the Admin. to the screen.
2. Touch [System Settings] → [Expert Adjustment] → [Density Adjustment] → [Black
Procedure
Image Density].
3. Touch the
(3) Image Stabilization
<Initialize+Stabilization>
Functions • To carry out an image stabilization sequence after the historical data of image stabili-
zation control has been initialized.
Use • Use if an image problem persists even after [Gradation Adjustment] has been exe-
cuted.
• Use if tone reproduction and maximum density are faulty even after image stabiliza-
tion has been executed.
Setting/ 1. Call the Admin. to the screen.
2. Touch [System Settings] → [Expert Adjustment] → [Image Stabilization] →
Procedure
[Initialize+Stabilization].
3. Press the Start key to start image stabilization.
The Start key turns red and stays lit up red during the image stabilization sequence.
4. Image stabilization is completed when the Start key turns blue.
134
-5 to +5
/ key to correct the image density.
-2 to +2
/ key to correct the image density.
Field Service Ver. 2.0 Dec. 2008