Konica Minolta bizhub C200 Service Manual page 235

10. Service Mode
<Mail Check>
Functions • To set whether or not to use mail check and the time interval for the POP server used
Use • To set whether or not to use mail check and the time interval for the POP server used
• To change the time interval for mail check.
Setting/ • The default setting is No.
Procedure
<Connection timeout>
Functions • To set the timeout period for connection during reception.
Use • To change the timeout period for connection during reception.
Setting/ • The default setting is 60 Sec.
Procedure
<APOP Authentication>
Functions • To set whether or not to authenticate the APOP during reception.
Use • To authenticate the APOP during reception.
Setting/ • The default setting is No.
Procedure
(3) Send
<SMTP server address>
Functions • To set the SMTP sever address for transmission used for the CS Remote Care.
Use • To set the SMTP server address.
• SMTP server address can be set by the IP address or the domain name.
Setting/ <Input IP Address>
Procedure • IP address version 4 format
<Input FQDN>
• Enter the domain name.
<SMTP port number>
Functions • To set the SMTP port number for transmission used for the CS Remote Care.
Use • To set the Port Number of the SMTP Server.
Setting/ • The default setting is 25.
Procedure
194
1
for the CS Remote Care.
for the CS Remote Care.
Yes
[0 to 255].[0 to 255].[0 to 255].[0 to 255]
Field Service Ver. 2.0 Dec. 2008
"No" (1 to120 min., No)
"60 Sec" (30 to 300 Sec)
"No"
"25" (1 to 65535)