Transport Drive Unit - Konica Minolta bizhub C200 Service Manual

Field Service Ver. 2.0 Dec. 2008
[2]
[1]
6.3.26

Transport drive unit

1. Remove the main drive unit.
See P.62
2. Remove the rear right cover.
See P.47
[1]
[1]
A02FF2C045DA
[2]
[1]
A02FF2C046DA
A02FF2C047DA
14. Remove eight screws [1], and slide
out the main drive unit [2].
15. Remove the E-ring [1], and remove
the gear [2].
NOTE
• There is a pin, which fixes the gear
to the shaft, installed inside the
gear.
Use care not to let the pin drop off
during the removal of the gear.
16. Remove the main drive unit.
3. Disconnect two connectors [1].
6. Other
65