Internet Isw - Konica Minolta bizhub C200 Service Manual

Field Service Ver. 2.0 Dec. 2008

10.12 Internet ISW

1
• By using this setting, the firmware stored in the server can be downloaded over internet
for upgrading.
• For details for upgrading the firmware, refer to "Firmware upgrade" in the Maintenance
section.
See P.31
10.12.1 Internet ISW Set
Functions • To set whether or not to enable each setting for Internet ISW.
Use • To use when upgrading the firmware by Internet ISW.
• Each setting such as Server setting will be valid by setting this to "ON".
Setting/ • The default setting is OFF.
Procedure
10.12.2 HTTP Setting
• It will be available only when [Internet ISW Set] is set to "ON".
A. Connect Proxy
Functions • To set whether or not to connect via proxy server when accessing the server.
Use • To use when accessing the server via proxy server.
Setting/ • The default setting is OFF.
Procedure
B. Proxy Server
Functions • To set the address and the port number for the proxy server.
Use • To use when accessing the server via proxy server.
Setting/ (1) Server Address
• Enter an address using FQDN format.
Procedure
(2) Port Number
• Enter the value between 1 and 65535 using the 10-key pad.
(The default setting is 80)
(3) Authentication Settings
<Authentication>
• The default setting is OFF.
<Login Name>
• Enter the login name (up to 32 one-byte characters) on the on-screen keyboard.
<Password>
• Enter the password (up to 32 one-byte characters) on the on-screen keyboard.
ON
ON
ON
10. Service Mode
"OFF"
"OFF"
"OFF"
315
1