Konica Minolta bizhub C200 Service Manual page 485

2. Firmware upgrade
3. Select [ON], and touch [OK].
NOTE
• Settings such as server setting, etc. will be available by selecting "ON" on this set-
ting.
B. HTTP Setting
• It performs the setting concerning the http protocol for connecting to the Internet ISW.
(1) Setting procedure
Step
0 Select [Internet ISW] which is available from [Service Mode].
1 Touch [HTTP Setting].
Touch [Connect Proxy].
2
• For connecting via proxy server, select [ON].
Touch [Proxy Server].
• For connection via proxy server, set a proxy server address, port number, and authentication
related items.
1. Select the [Server Address], and set the proxy server address.
2. Select [Port Number], and set the port number for the proxy server from 1 through 65535.
3
3. Select [Authentication Settings].
4. When Authentication is necessary for accessing to the proxy server, select [Authentication],
and select [ON].
5. Select [Login Name], and enter the login name on the on-screen keyboard.
6. Select [Password], and enter the password on the on-screen keyboard.
Touch [Connection Timeout].
4
• Set the time for the connection time out between 30 and 300 seconds.
C. Forwarding Access Setting
• To make the access setting for the program server which stores the firmware data.
1. Select [Internet ISW] which is available from [Service Mode].
2. Touch [Forwarding Access Setting].
3. Select [Login Name], and enter the login name which is necessary for connecting to the
program server on the on-screen keyboard, and touch [OK].
4. Select [Password], and enter the password which is necessary for connecting to the
program server on the on-screen keyboard, and touch [OK].
5. Select [URL], and enter the directory which stores the program server address and the
firmware on the on-screen keyboard by URL method, and touch [OK].
6
1
Field Service Ver. 2.0 Dec. 2008
Connecting by http
A02FF2E541DA