Ping; Firmware Version; Security Settings - Konica Minolta bizhub C200 Service Manual

Field Service Ver. 2.0 Dec. 2008
(4) For copy settings
Mode
1
402 • Specifying settings for the main application
403 • Specifying settings for using copy mode operations
417 • Specifying whether or not the number of copies are limited
471 • Specifying how the screen for selecting an account appears in administrator mode
501 • Specifying settings for enlarge display mode
835 • Specifying the setting concerning public accounts
8.6.15

Ping

Functions • To set the TCP/IP network diagnosis by Ping.
Use • To check the condition of TCP/IP network.
Setting/ 1. Touch [Ping].
Procedure 2. Select the destination to send the Ping.
(When selecting [Ping IP Address], enter the IP address of the destination server.)
3. Press the start key, and check that it is connected.
8.6.16

Firmware Version

Functions • To display the firmware version of this machine.
Use • To check the firmware version when trouble occurs while updating the firmware.
• Types of firmware displayed are as follows.
MAIN, Printer, LCT, Job Sep., Fax (Europe only)
Setting/ 1. Touch [Firmware Version].
Procedure 2. Confirm the firmware version.
8.6.17

Security Settings

A. Function Mgmt Settings
(1) Usage Settings For Each Functions
1
• It is displayed only when the vendor or authentication device is installed.
Functions • To set whether to use management function for each item of [Copy], [Scan/Fax] and
[Print].
Use • To make a usage setting for each machine function or to prohibit the use of each
function.
ON : Function is enabled when authentication is made or a coin is inserted.
OFF : Function is always enabled regardless of authentication or coin insertion.
Setting/ • The default setting is ON.
Procedure
Setting item
"ON" OFF
8. Utility Mode
Prohibit
153
1