Konica Minolta bizhub C200 Service Manual page 279

10. Service Mode
Mode
362
State
Bit
5-1 Intervals for calling during network communi-
cation
Applicable communication mode is PC (e-
mail), one-touch document scan, IP address
fax, internet fax, and IP relay (forwarding
command).
Mode
363
State
Bit
6 SMTP expansion prohibited
(Network function)
5 Specify From address for DSN report trans-
mission (Network function)
238
Default value
Bit 7654 3210
1000 1010
Setting item
Default value
Bit 7654 3210
0100 0000
Setting item
Field Service Ver. 2.0 Dec. 2008
HEX: 8A
Setting value
0 1
Not avail-
00000
able
00001 1 sec.
:
00101 5 sec.
:
01010 10 sec.
Not avail-
others
able
HEX: 40
Setting value
0 1
Select either "Permitted"
or "Prohibited" for SMTP
Prohib-
Permitted expansion protocol.
ited
Valid after the power is
turned off and on.
Chain mail can be pre-
Address
Address vented by specifying an
not speci-
specified address for DSN report on
fied
some systems.
Description
It is for net-
work com-
munication.
Only the
interval
between the
end of a
communica-
tion and the
end of the
following
communica-
tion is short-
ened.
Description