Konica Minolta bizhub C200 Service Manual page 287

10. Service Mode
Mode
380
Bit
7 Enable APOP authentication function
6 Enable SMTP authentication function
5 SMTP authentication: Allow CRAMMD5
authentication function
4 SMTP authentication: Allow LOGIN authenti-
cation function
3 SMTP authentication: Allow PLAIN authenti-
cation function
2 Separate SMTP authentication ID/password
and POP3 information
1 HTTP server setting
1
0 Set to use SSL/TLS with HTTP
NOTE
(*1) The SMTP authentication function is valid under the following conditions.
• MODE 380 Bit 6 is set to "1."
• When the SMTP authentication user name and SMTP authentication password
share the POP3 user name and POP3 password, and MODE 380 Bit 2 is set to "0."
When the SMTP authentication user name and SMTP authentication password do
not share the POP3 user name and POP3 password, MODE 380 Bit 2 is set to "1",
and "SMTP AUTH User Name" and "SMTP AUTH Password" are set in Network
Settings.
• MODE 380 Bit 5, 4, or 3 is set to "0."
(*2) When all mail authentication functions are validated (MODE 380 Bits 5, 4, and 3
all are set to "0"), they are prioritized in the order "CRAM-MD5 authentication
(Bit 5)" → "LOGIN authentication (Bit 4)" → "PLAIN authentication (Bit 3)."
246
1
Default value
Bit 7654 3210
State 0011 1010
Setting item
Field Service Ver. 2.0 Dec. 2008
HEX: 3A
Setting value
0 1
Not Specify whether to enable
Enable
enable the APOP function.
Specify whether to enable
Not
Enable the SMTP authentication
enable
function. (*1)
Specify whether to enable
Not the CRAM-MD5 authenti-
Allowed
allowed cation function for SMTP
authentication. (*2)
Specify whether to enable
Not the LOGIN authentication
Allowed
allowed function for SMTP authen-
tication. (*2)
Specify whether to enable
Not the PLAIN authentication
Allowed
allowed function for SMTP authen-
tication. (*2)
Specify whether to share
Not sepa- the SMTP authentication
Separate
rate ID/password with POP3
information.
Set whether to use HTTP
Not use Use
server protocol.
Set whether to use SSL/
Not use Use
TLS with HTTP.
Description