Konica Minolta bizhub C200 Service Manual page 174

Field Service Ver. 2.0 Dec. 2008
D. Date & Time Settings
(1) Date & Time Setting
Functions
• To set Year, Month, Day, Hour, and Minute.
Use
Setting/ 1. Touch Year, Month, Day, Hour, and Minute key to enter the values.
Procedure 2. Touch [OK] to finish setting.
(2) Time Zone
Functions
• To set the time zone.
Use
Setting/ • For time zone, set the time difference with the world standard time.
Procedure • Setting range for the time zone: -12:00 to +13:00 (by 30 minutes)
(3) Daylight Saving Time
• It is displayed only when bit 6 for the mode 486 is set to "0" by the following setting:
1
[Service Mode] → [System] → [Software Switch Setting].
Functions • To set the timing to switch to the summer time.
Use • To set the summer time.
TYPE A: Sets the timing to start/finish summer time with month/date/hour.
TYPE B: Sets the timing to start/finish summer time with month/day of the week/
Setting/ 1. Touch [Type A] or [TYPE B] to set the timing to start/finish summer time.
Procedure 2. Touch [OK] to complete setting.
E. Expert Adjustment
(1) AE Level Adjustment
Functions • To set the default setting for AE (Auto Exposure) the larger the value becomes the
more emphasized the background will be.
Use To make the background level foggier
To make the background level less foggy : Decrease the setting value
Setting/ • The default setting is 2.
Procedure
date/hour.
"2" (0 to 4)
: Increase the setting value
8. Utility Mode
133
1