Job Separator Transport Section Misfeed - Konica Minolta bizhub C200 Service Manual

5. Jam display
5.3.3

Job separator transport section misfeed

A. Detection timing
Type
Transport section misfeed
detection
Detection of paper remain-
ing in the transport section
B. Action
Paper exit sensor (PS2)
Lower tray exit sensor (PS1)
Upper tray exit sensor (PS2)
Step
1 Initial checks
PS2 (paper exit sensor) I/O check,
2
sensor check
3 PS1 I/O check, sensor check
PS2 (Upper tray exit sensor) I/O check,
4
sensor check
5 JSCB replacement
6 PRCB replacement
22
The lower tray exit sensor (PS1) is not turned ON even after the set period
of time has elapsed after the copier's paper exit sensor (PS2) is turned ON
by the paper.
The upper tray exit sensor (PS2) is not turned ON even after the set period
of time has elapsed after the copier's paper exit sensor (PS2) is turned ON
by the paper.
The lower tray exit sensor (PS1) is not turned OFF even after the set
period of time has elapsed after the copier's paper exit sensor (PS2) is
turned OFF by the paper.
The upper tray exit sensor (PS2) is not turned OFF even after the set
period of time has elapsed after the copier's paper exit sensor (PS2) is
turned OFF by the paper.
The paper exit sensor (PS25) is not turned ON even after the set period of
time has elapsed after the copier's paper exit sensor (PS2) is turned ON
by the paper.
The lower tray exit sensor (PS1) is turned ON when the power switch is set
to ON, a door or cover is opened and closed, or a misfeed or malfunction
is reset.
The upper tray exit sensor (PS2) is turned ON when the power switch is
set to ON, a door or cover is opened and closed, or a misfeed or malfunc-
tion is reset.
Relevant electrical parts
JS control board (JSCB)
Printer control board (PRCB)
Action
Field Service Ver. 1.0 Jun. 2008
Description
WIRING DIAGRAM
Control signal
—
—
JSCB PJ7-6 (ON)
JSCB PJ7-9 (ON)
—
—
Location (Electrical
components)
—
—
JS-505 F-4 to 5
JS-505 F-4
—
—