Fusing Unit - Konica Minolta bizhub C200 Service Manual

6. Other
[1]
6.3.23

Fusing unit

• The temperature gets high in the vicinity of the fusing unit. You may get
burned when you come into contact with the area. Before replacement
operations, make sure that more than 20 minutes have elapsed since the
main and sub power switches were turned off.
1. Open the front door.
2. Open the right door.
[1]
[2]
56
[2]
A02FF2C034DA
CAUTION
[2]
A02FF2C035DA
[1]
[1]
A02FF2C036DA
Field Service Ver. 2.0 Dec. 2008
4. Snap off the E-ring [1] and the tray 1
separation roller assy [2].
3. Remove the screw [1], and remove
the connector protective cover [2].
4. Disconnect three connectors [1].
5. Remove the harness from the wire
saddle [2].