Utility Mode – Copy Functions
To display/clear the total count for a specific account
1
Select the "ADMIN.
MANAGEMENT" menu.
Refer to"To select the "ADMIN.
MANAGEMENT" menu" on
page 7-23.
2
Press the [2] key from the 10-Key Pad to select "COPY TRACK".
3
Using the 10-Key Pad, enter the 6-
digit administrator access number,
and then press the [Yes] key.
The "COPY TRACK" appears.
4
Using the
"COPY TRACK DATA?", and then
press the [Yes] key.
5
Using the
"DISPLAY", and then press the
[Yes] key.
6
Using the
the access number for the counter
that you wish to check, and then
press the [Yes] key.
The desired access (section)
number can also be entered
using the 10-Key Pad.
When clearing the counter for a specific account (section), the
access (section) number for that account should be selected.
The total count for the selected account (section) is displayed.
Di1611/Di2011
and
keys, select
and
keys, select
and
keys, select
7
7-31