Shift Motor (M2) - Konica Minolta bizhub C200 Service Manual

Field Service Ver. 1.0 Jun. 2008
2.3.10

Shift motor (M2)

1. Remove the separator.
See P.5
2. Remove the front cover.
See P.6
3. Remove the route change motor.
See P.10
[3]
[2]
[1]
[1]
[1]
[1]
[2]
A083F2C015DA
[3]
[1] [4]
A083F2C016DA
[1]
[2]
A083F2C017DA
4. Remove the C-clip [1] and the lever
[2], and remove the route change
guide [3].
5. Remove two wire saddles [1], dis-
connect two connectors [2], and
remove two screws [3]. Pull out the
sensor assy [4] in the direction of the
arrow.
6. Remove six screws [1] and remove
the transport guide/lower [2].
2. Other
11