Konica Minolta bizhub C200 Service Manual page 190

Field Service Ver. 2.0 Dec. 2008
<Maximum Search #>
Functions • To set the max. results of address for LDAP search.
Use • To change the max. results of address for LDAP search.
Setting/ 1. Touch [Maximum Search #].
Procedure 2. Press the Clear key.
3. Enter the max. search result numbers between 5 and 1000 using the 10-key pad.
<Timeout>
Functions • To set the Max. timeout period for LDAP search.
Use • To change the Max. timeout period for LDAP search.
Setting/ 1. Touch [Timeout].
Procedure 2. Press the Clear key.
3. Enter the timeout period between 5 and 300 using the 10-key pad.
<Check Connect.>
• It will not be displayed when [LDAP Settings] is set to "No."
Functions
• To check the connection with the LDAP server which has been set.
Use
Setting/ 1. Touch [Check Connect.].
Procedure 2. Confirm a proper connection and touch [OK].
<Initial>
Functions
• To return the contents registered in the LDAP server to what they were prior to the
shipping.
Use
Setting/ 1. Touch [Initial].
Procedure 2. Check the message and touch [Yes].
(2) Search Default Setting
1
Functions
• To set the server to be used as the default when searching LDAP.
Use
Setting/ 1. Touch [Search Default Setting].
Procedure 2. Select the optional server.
I. Frame Type Set
1
Functions • To set the ethernet frame type.
Use • To specify the frame type for transmission.
Setting/ • The default setting is Auto Detect.
Procedure
"Auto Detect" 802.2 802.3 Ethernet II
8. Utility Mode
802.3SNAP
149
1