Konica Minolta bizhub C200 Service Manual page 289

10. Service Mode
Bit
2-0 Set default relay station for IP relay
Set the default relay sending machine for IP
relay (sending machine).
Mode
383
Bit
6 Mail RX authentication (SMTP).
5 Restrict mail authentication (CRAM-MD5).
4 Restrict mail authentication (LOGIN).
3 Restrict mail authentication (PLAIN).
NOTE
(*1) SMTP authentication is valid when the following conditions are met:
• MODE 383 Bit 6 is set to "1."
• One of MODE 383 Bit 5, 4, 3 is set to "0."
(*2) When all the mail authentications are enabled (Bit 5 to 3 are all "0"), priority is
set as CRAM-MD5 (Bit 5) → LOGIN (Bit 4) → PLAIN (Bit 3)
Mode
384
Bit
7 Set TCP/IP
6 Set LPD
5 Set port (RAW port)
4 Set SLP
1
248
1
Setting item
Default value
Bit 7654 3210
State 0011 1000
Setting item
Default value
Bit 7654 3210
State 1111 1111
Setting item
Field Service Ver. 2.0 Dec. 2008
Setting value
0 1
000 Relay station 1
001 Relay station 2
010 Relay station 3
011 Relay station 4
100 Relay station 5
101 Relay station 6
110 Relay station 7
111 Relay station 8
HEX: 38
Setting value
0 1
Disable Enable (*1)
No Yes (*2)
No Yes (*2)
No Yes (*2)
HEX: FF
Setting value
0 1
Specifies whether to use
Not use Use
TCP/IP.
Specifies whether to use
Not use Use
LPD.
Specifies whether to use
Not use Use
RAW port.
Specifies whether to use
Not use Use
SLP protocol.
Description
Description
Description