Summit X150-48T Switch - Extreme Networks Summit X150 Series Hardware Installation Manual

Summit Family Switches

Summit X150-48t Switch

The front panel of the Summit X150-48t switch
Forty-eight fixed autosensing 10/100BASE-T ports (ports 1–48) that provide 4.8 Gbps of high-density
●
copper connectivity
Two combination ports (ports 49–50) using RJ-45 connectors and SFPs to provide 2 Gbps of copper
●
or fiber connectivity
For more information about combination ports, see
For information about SFPs, see the Extre me Ne two rks Plugga ble Inte rfa ce Mo dule s Ins ta lla tio n Guide .
LEDs to indicate port status and switch operating conditions.
●
For a description of the LEDs and their operation, see
page 21.
Serial console port used to connect a terminal and perform local management.
●
Figure 5: Summit X150-48t Switch Front Panel
The rear panel of the Summit X150-48t switch
Management port with associated LEDs
●
Redundant power input connector for optional connection to the EPS-160 External Power Module.
●
See "EPS-160 External Power Module (with EPS-T)" on page 75
connecting redundant power supply cable is shipped with the EPS-160 unit.
AC power input socket
●
Figure 6: Summit X150-48t Switch Rear Panel
Management port
20
(Figure
10/100 Mbps ports
(Figure 6) includes:
External power
supply connection
Power socket
5) includes:
"Combination Ports and Failover" on page
"Summit X150 Series Switch LEDs" on
Console
port
Combination ports
SH_054A
for more information. The
Summit Family Switches Hardware Installation Guide
16.
SH_055