Summit X150-24T Switch - Extreme Networks Summit X150 Series Installation Manual

Summit X150-24t Switch

The front panel of the Summit X150-24t switch
Twenty-four fixed autosensing 10/100BASE-T ports (ports 1–24) that provide 2.4 Gbps of
●
high-density copper connectivity
Two combination ports (ports 25–26) using RJ-45 connectors and SFPs to provide 2 Gbps of copper
●
or fiber connectivity
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
LEDs to indicate port status and switch operating conditions.
●
For a description of the LEDs and their operation, see
page 22.
Serial console port used to connect a terminal and perform local management.
●
Figure 1: Summit X150-24t Switch Front Panel
Stack
1
2
The rear panel of the Summit X150-24t switch
Ethernet management port with associated LEDs
●
Redundant power input connector for optional connection to the EPS-160 External Power Module.
●
See "EPS-160 External Power Module (with EPS-T)" on page 64
connecting redundant power supply cable is shipped with the EPS-160 unit.
AC power input socket
●
Figure 2: Summit X150-24t Switch Rear Panel
Management port
ExtremeXOS Summit Family Switches Hardware Installation Guide
(Figure
10/100 Mbps ports
(Figure
External power
supply connection
Power socket
1) includes:
"Summit X150 Series Switch LEDs" on
Console
port
Combination ports
SH_050B
2) includes:
for more information. The
SH_051
19