(3)
Open the front cover of the hole punch unit.
Push the 2 latches and take off the hole
punch unit front lower cover.
(4)
Open the finisher front cover. Remove 1
screw and pull out the fixing plate.
(5)
Loosen 1 screw and take off the groune wire.
June 2005 © TOSHIBA TEC
Front lower cover
Fig.2-137
Fixing plate
Fig.2-138
Fig.2-139
e-STUDIO281c/351c/451c OUTLINE OF THE MACHINE
2 - 65
06/07
2