Note:
Install the bracket so that its pointer is placed
at the same position as before.
(4)
Disconnect 1 connector, remove 1 screw and
take off the SFB board.
[A-4]
Bypass feed upper cover
(1)
Take off the bypass unit (
Bypass unit").
(2)
Remove 1 screw and slide the bypass feed
upper cover to take it off.
e-STUDIO281c/351c/451c PAPER FEEDING SYSTEM
P.10-9 "[A-1]
10 - 12
Pointer
Fig.10-16
SFB board
Fig.10-17
Bypass feed upper cover
Fig.10-18
June 2005 © TOSHIBA TEC