Toshiba e-STUDIO281c Service Manual page 262

[H] Drum cleaning blade
(1) Take off the transfer belt unit
( P.14-8 "[A] Transfer belt unit / Transfer
belt cleaning unit").
(2) Take off the main charger unit
( P.11-15 "[D] Main charger unit"]).
(3) Take off the drum (
(4) Remove 3 screws and take off the drum
cleaning blade.
Note:
Be sure not to touch or scratch the edge of
the cleaning blade.
[I] Recovery blade
(1) Take off the drum (
(2) Take off the recovery blade.
Notes:
1. When the recovery blade is being
attached, clean the attaching side of the
cleaner side, and then attach the blade
paying attention not to deform it.
2. Attach the recovery blade by pushing it to
the step of the attaching part.
3. When the blade has been attached, press
the attached part securely with your fin-
gers so that it will not be removed.
[J] Drum cleaning brush
(1) Take off the drum cleaning blade
( P.11-18 "[H] Drum cleaning blade").
(2) Rotate the lever to unlock it, and then pull out
the lever.
e-STUDIO281c/351c/451c DRUM RELATED SECTION
P.11-13 "[C] Drum").
P.11-13 "[C] Drum").
11 - 18
Drum cleaning blade
Fig.11-30
Fig.11-31
Fig.11-32
Recovery blade
Lever
June 2005 © TOSHIBA TEC