Toshiba e-STUDIO281c Service Manual page 81

(5) Take off the finisher.
Note:
Be careful not to fell the finisher when mov-
ing only the finisher unit.
[H] MJ-6004 (Hole punch unit)
(1) Turn OFF the power and unplug the power
cable.
(2) Take off the connector cover and disconnect
connector.
(3) Open the front cover of the hole punch unit
and remove 1 screw.
June 2005 © TOSHIBA TEC
Fig.2-125
Connector cover
Fig.2-126
Fig.2-127
e-STUDIO281c/351c/451c OUTLINE OF THE MACHINE
2 - 61
06/07
2