(4)
Remove 1 screw and lay down the interlock
switch bracket completely toward you.
Note:
If the interlock switch bracket does not lie
down completely, pull the harness a little and
then try to lay it down.
(5)
Disconnect 3 connectors and remove 2
screws.
(6)
Loosen 2 screws and take off the process
unit by pulling it toward you.
June 2005 © TOSHIBA TEC
Harness
Switch bracket
Fig.11-9
Connector
Connector
Fig.11-10
Fig.11-11
e-STUDIO281c/351c/451c DRUM RELATED SECTION
11 - 11
06/07
Screw
Process unit
11