Toshiba e-STUDIO281c Service Manual page 222

(6) Remove 3 screws. Lift up the bypass unit
and take it off toward you.
Note:
When installing the bypass unit, make sure
that the ADU is closed in advance since the
bypass unit occasionally does not slide
smoothly.
[A-2] Hinge assembly
(1) Take off the bypass unit (
Bypass unit").
(2) Disconnect 1 connector and release the har-
ness from the harness clamp.
(3) Remove 2 screws and slide the hinge
assembly to take it off with the tray.
e-STUDIO281c/351c/451c PAPER FEEDING SYSTEM
P.10-9 "[A-1]
Connector
10 - 10
05/08
Fig.10-10
Fig.10-11
Tray
Fig.10-12
June 2005 © TOSHIBA TEC
Bypass unit
Hinge assembly