Toshiba e-STUDIO281c Service Manual page 206

[E] Transport motor drive unit
(1) Take off the rear cover-2 (
cover-2").
(2) Take off the right rear cover (
Right rear cover").
(3) Take off the right rear hinge cover
( P.2-31 "[P] Right rear hinge cover").
(4) Take off the SYS board case
( P.2-35 "[D] SYS board case").
(5) Remove 3 screws and take off the flywheel.
(6) Take off the IH board case (
IH board (IH) / IH board case").
(7) Take off the ozone exhaust fan with the
ozone exhaust duct (
exhaust fan (M18)").
(8) Remove 1 screw and take off the bracket.
(9) Remove 1 screw and take off the cover plate.
(10) Remove 2 screws and take off the bracket.
e-STUDIO281c/351c/451c DRIVE SYSTEM
P.2-32 "[S] Rear
P.2-30 "[O]
P.16-34 "[N]
P.11-24 "[R] Ozone
9 - 14
Bracket
Fig.9-22
Cover plate
Fig.9-23
Bracket
Fig.9-24
June 2005 © TOSHIBA TEC