Toshiba e-STUDIO281c Service Manual page 239

[E] Pre-registration guide (Paper dust removal brush)
(1) Open the second transfer unit.
(2) Pull the knob and take off the pre-registration
guide.
Note:
When taking off the pre-registration guide,
pay attention not to drop the removed paper
dust from the brush into the inside of the
equipment.
[F] Paper feed guide assembly
(1) Take off the 2nd transfer unit
( P.14-16 "[J] 2nd transfer unit").
(2) Remove 1 screw and take off the gear cover.
(3) Open the side cover.
(4) Remove 6 screws and take off the stay.
June 2005 © TOSHIBA TEC
Fig.10-59
Gear cover
Fig.10-60
Fig.10-61
e-STUDIO281c/351c/451c PAPER FEEDING SYSTEM
10 - 27
05/08
Pre-registration guide
Stay
10