Toshiba e-STUDIO281c Service Manual page 310

[E] Color developer unit drive gear / Color toner supply drive gear
(1) Take off the color developer unit (
"[B] Color developer unit").
(2) Remove 1 screw, release 1 latch and take off
the holder. Then take off the color developer
unit drive gear and color toner supply drive
gear.
Notes:
1. When installing, insert the shaft of the
holder into the revolver unit securely.
2. Apply the grease to the shaft after the
replacement of the gears.
e-STUDIO281c/351c/451c REVOLVER UNIT
P.12-21
Grease
13 - 10
06/07
Holder
Fig.13-10
Grease
Fig.13-11
June 2005 © TOSHIBA TEC