Toshiba e-STUDIO281c Service Manual page 205

(6) Disconnect 1 connector, remove 1 gear, 1 E-
ring and 1 bushing, and then take off the
black developer drive clutch.
Note:
Place the stopper when installing the clutch.
(7) Remove 5 screws and take off the bracket.
(8) Remove 1 clip and 1 gear.
(9) Remove 1 clip and 1 bushing. Remove 1
gear.
(10) Disconnect 1 connector and take off the color
developer drive clutch.
Note:
Place the stopper when installing the clutch.
June 2005 © TOSHIBA TEC
Gear
E-ring
Bushing
Fig.9-19
Bracket
Fig.9-20
Gear
Color developer drive clutch
Fig.9-21
e-STUDIO281c/351c/451c DRIVE SYSTEM
9 - 13
Connector
Black developer drive clutch
Gear
Clip
Connector
Clip
Bushing
9