Toshiba e-STUDIO281c Service Manual page 259

(7) Take off the drum.
Notes:
1. Be sure not to touch, spit or scratch on
the drum surface.
2. Avoid a direct sunlight onto the drum.
Move it to a dark place as soon as it is
taken off.
3. Be sure not to touch the drum thermistor.
4. Be sure not to touch or scratch the edge
of the cleaning blade.
[D] Main charger unit
(1) Take off the process unit
( P.11-10 "[B] Process unit").
(2) Rotate the gear counterclockwise for 1 round
or more.
(3) Release 2 latches and take off the main
charger unit.
Note:
Be sure not to touch or damage the drum
surface.
Note:
When the main charger unit is being
installed, rotate the gear counterclockwise
for 1 round or more and install it while the
holder arm is being pulled completely inside.
June 2005 © TOSHIBA TEC
Drum
Fig.11-21
2
2
Fig.11-22
Gear
Holder arm
Fig.11-23
e-STUDIO281c/351c/451c DRUM RELATED SECTION
11 - 15
Gear
1
Main charger unit
11