Toshiba e-STUDIO281c Service Manual page 70

(3) Remove 2 screws and take off the rear
cover-1.
(4) Remove 3 screws and take off the rear
cover-2.
Note:
Disconnect the connectors of the RADF first
when the RADF is installed.
(5) Remove 1 screw and the ground wire, and
then disconnect 2 connectors (3 if the
optional damp heater is installed).
e-STUDIO281c/351c/451c OUTLINE OF THE MACHINE
2 - 50
Rear cover-1
Fig.2-92
Rear cover-2
Fig.2-93
Fig.2-94
June 2005 © TOSHIBA TEC