(7)
Remove 5 screws and take off the hinge
bracket.
(8)
Disconnect 5 connectors.
(9)
Release the harness from 2 harness clamps.
(10) Remove 1 screw and take off the DSP board.
(11) Remove 4 screws and take off the LCD.
June 2005 © TOSHIBA TEC
Hinge bracket
Fig.5-15
DSP board
Fig.5-16
Fig.5-17
e-STUDIO281c/351c/451c CONTROL PANEL
5 - 17
LCD
5