[F]
Fuser belt
(1)
Take off the fuser roller
(
P.16-23 "[E] Fuser roller / Fuser belt
guide").
(2)
Lift up the fuser belt unit and take it off.
Note:
Be careful not to scratch the fuser belt. Lay
the fuser belt on the clean place to prevent
the belt from the dust.
(3)
Remove 1 screw and take off the bracket on
the front side.
(4)
Remove 1 screw and take off the bracket on
the rear side.
June 2005 © TOSHIBA TEC
Fuser belt unit
Fig.16-28
Screw
Bracket
Fig.16-29
Fig.16-30
e-STUDIO281c/351c/451c FUSER UNIT / PAPER EXIT SECTION
16 - 25
Bracket
Screw
16