Construction - Toshiba e-STUDIO281c Service Manual

14.2 Construction

Process unit
Transfer belt unit
Transfer belt cleaning unit Transfer belt cleaning blade
Transfer belt cleaner auger motor (M2)
Transfer belt cleaner clutch (CLT1)
2nd transfer unit
2nd transfer roller
2nd transfer roller contact clutch (CLT5)
2nd transfer roller position detection sensor (S18)
e-STUDIO281c/351c/451c TRANSFER UNIT
Transfer belt
1st transfer roller
Tension roller
Drive roller
2nd transfer facing roller
2nd transfer guide roller
Idling roller
Transfer belt home position sensor-1 (S15)
Transfer belt home position sensor-2 (S16)
Used toner auger
Transfer belt cleaning unit side seal-F
Transfer belt cleaning unit side seal-R
Transfer belt cleaning unit side mylar-F
Transfer belt cleaning unit side mylar-R
14 - 2
PM parts
PM parts
PM parts
PM parts
PM parts
PM parts
June 2005 © TOSHIBA TEC