(5)
Remove 2 screws and take off the separation
finger unit.
(6)
Remove the spring and separation finger.
[H] Pressure roller
(1)
Take off the fuser belt unit
(
P.16-25 "[F] Fuser belt").
(2)
Take off the separation finger unit
(
P.16-27 "[G] Separation finger").
(3)
Take off the pressure roller.
e-STUDIO281c/351c/451c FUSER UNIT / PAPER EXIT SECTION
Separation finger unit
16 - 28
Fig.16-37
Separation finger
Fig.16-38
Pressure roller
Fig.16-39
June 2005 © TOSHIBA TEC