Toshiba e-STUDIO281c Service Manual page 392

(5) Remove 2 screws and take off the ADU
motor.
(6) Take off the timing belt and 1 E-ring. Then
take off the gears from the ADU drive unit.
[I] Upper transport roller
(1) Take off the ADU drive unit.
( P.17-15 "[H] ADU motor (M5) / ADU drive
unit")
(2) Remove 1 E-ring on the rear side. Then take
off 1 pulley.
e-STUDIO281c/351c/451c AUTOMATIC DUPLEXING UNIT (ADU)
Gear
Gear
Pulley
E-ring
17 - 16
ADU motor
Fig.17-20
Timing belt
Gear
E-ring
Fig.17-21
Fig.17-22
June 2005 © TOSHIBA TEC