Editing And Saving A Configuration Option - Paradyne COMSPHERE 3821PLUS User Manual

COMSPHERE 3821Plus Modem
(Modem Status)
MDMA mdmb mdmc
Status Test
Call_Setup
Configure
Ld EditArea frm:
Factory
Activ
(Operating)
Customer2
Customer1
Async_Dial
Active
(Saved)
Choose Function
Edit
Active (Saved) Customer1
DTE_Interface Line_Dialer Leased_Line
DTE_Dialer Dial_Line
*
Available if ETC is installed

Editing and Saving a Configuration Option

The following example shows how to change the
Remote Access Password using the SDCP. (If you ever
intend to access another 3800Plus modem via the
Remote branch of the Top-Level menu, the Remote
Access Password must be the same for both modems.)
By following these procedures you learn how to load a
factory preset configuration area (in this case, Async
Dial), how to edit a configuration option (Remote Access
Password), and how to save changes to a configuration
area (Active (Saved)). The shaded key indicates what
key to press.
3-16
Remote
Control Security
*
Cellular
Sync_Leased
(PSTN)
Sync_Dial UNIX_Dial
*
Choose Mode Cellular
(Mobile)
Answer
Originate
Save
Customer2
Test Security
V42/MNP/Buffer Misc
98-14845-01
Idle : 33.6
Test
F1
Select Configure from the Top-Level menu.
Ld EditArea frm
Activ (Operating)
F1
Ld EditArea frm
Factory
F1
Select the Factory configuration area.
Ld Fact Preset :
Async_Dial
F1
Select Async_Dial.
Choose Function
Edit
F1
Select Edit.
Edit StrapGroup
DTE_Interface
F1
January 1999
Configure
F2 F3
>
F2 F3
<
F3
F2
>
F3
F2
Save
F3
F2
>
F2 F3
3821-A2-GB20-40