Saving Configuration Options - Paradyne 7974 User Manual

Saving Configuration Options

"
Î Î
7900-A2-GB21-00
When changes are made to the configuration options through the Configuration
Edit/Display branch, the changes must be saved to take effect. Use the Save key
or Save Configuration screen.
Procedure
To save configuration options changes:
1. Press Ctrl-a to switch to the screen function key area below the dotted line.
2. Select Save and press Enter.
NOTE:
When Exit is selected before Save, or Save has been selected from any
menu in the Configuration/Edit branch, a Save Configuration screen appears
requiring a Yes or No response.
main/config/saveprompt
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu
Command Complete
If you select . . . Then . . .
Yes The configuration is saved.
No The Main Menu appears and changes are not saved.
If the Telnet Session configuration option is changed, a message appears on the
Save Configuration screen warning that an answer of Yes will cause the Telnet
session to disconnect. Do not answer Yes unless you are prepared to disconnect.
If the DSL Mode configuration option is changed, a message is appears on the
Save Configuration screen warning that an answer of Yes will cause the system
to be reset. Do not answer Yes unless you are prepared to reset the unit.
August 2000
Initial Startup and Configuration
SAVE CONFIGURATION
Save Changes? No
Model: 797x
Î Î Î Î
MainMenu Exit
3-13