Registering An Ncp Folder - Ricoh C2828 Function Manual

8. Press the protocol which is not currently selected.
A confirmation message appears.
9. Press [Yes].
10. Press [OK].
11. Press [Exit].
12. Press the [User Tools/Counter] key.
• To delete a name entirely, see "Registering Names".
• p.245 "Registering Names"

Registering an NCP folder

This section describes how to register an NCP folder.
1. Press the [User Tools/Counter] key.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [Address Book Management].
5. Check that [Program / Change] is selected.
6. Press the name you want to register or enter the registered number using the number keys.
You can search by the registered name, fax number, folder name, e-mail address, or IP-Fax
destination.
Registering Folders
5
287