Settings When Ipsec Is Available / Unavailable; Interface - Ricoh C2828 Function Manual

Category
Security / User Lockout Policy

Settings when IPsec is available / unavailable

IPsec encrypts all network transmissions. If IPsec is available on your network, we recommend you enable
it to enhance the security of the data travelling on your network.
Settings when IPsec is available
If IPsec is available on your network, use the settings shown in the following table to enhance the security
of the machine's data when it is travelling on your network.
• Control Panel settings to configure when IPsec is available
Feature Setting Menu
System Settings
System Settings
*1 You can configure "Permit SSL/TLS Communication" using Web Image Monitor.
• Web Image Monitor settings to configure when IPsec is available
Category
Security / IPsec
Security / SSL/TLS
Security / IPsec
Settings
Lock Out User for
Tab Settings

Interface

IPsec
Settings
Interface Permit SSL/TLS
Settings Communication *1
Settings
Exclude HTTPS
Communication
Permit SSL/TLS
Communication *1
Encryption Key
Manual Settings
Additional Information Enhanced Security
Setting Value
If you select [Active], select
Lockout Release Time of at least
60 minutes.
If you select [Lockout Release
Timer] select Lockout Release
Time of at least 60 minutes.
Setting Value
Active
Ciphertext Only
Setting Value
Set to [Active] or [Inactive].
If you select [Active] for "Exclude HTTPS
Communication" set "Permit SSL/TLS
Communication" to [Ciphertext Priority].
Active
8
223